Milwaukee 2554-20: Understanding Key Features, Comparisons, Manuals, And Reputable Buying Options

Milwaukee 2554-20 Information

The Milwaukee 2554-20 M12 FUEL 3/8 in. Stubby Impact Wrench is a cordless impact wrench that is designed for professional use. It is part of the M12 FUEL line of tools, which are known for their power, performance, and durability. Image of Milwaukee 2554-20 M12 FUEL 3/8 in. Stubby Impact Wrench

The 2554-20 features a POWERSTATE brushless motor that delivers up to 250 ft-lbs of torque, which is more than enough power to loosen even the most stubborn fasteners. It also has a REDLINK PLUS intelligence system that protects the tool from overloads and provides extended battery life.

The 2554-20 is also very compact and lightweight, making it easy to maneuver in tight spaces. It measures just 4.8 inches long and weighs only 2.4 pounds, so you can use it for extended periods of time without fatigue.

The impact wrench has a 4-mode DRIVE CONTROL dial that allows you to select the perfect setting for the job at hand. The four modes are:

  • Mode 1: Low speed and high torque for loosening tough fasteners
  • Mode 2: Medium speed and torque for general purpose use
  • Mode 3: High speed and low torque for driving fasteners
  • Mode 4: Auto-shutoff for preventing over-tightening

The 2554-20 comes with a one-year warranty and is backed by Milwaukee's legendary reputation for quality.

Specifications

FeatureSpecification
MotorPOWERSTATE brushless motor
TorqueUp to 250 ft-lbs
Drive size3/8 in.
Speed0-1,700 RPM
Impacts per minute0-3,000 IPM
Weight2.4 pounds
Length4.8 inches
BatteryM12 REDLITHIUM XC5.0 battery (not included)

Features

  • POWERSTATE brushless motor for more power and runtime
  • REDLINK PLUS intelligence system for protection against overloads and extended battery life
  • 4-mode DRIVE CONTROL dial for precise control
  • Compact and lightweight design for easy maneuverability
  • One-year warranty

What's in the box

  • M12 FUEL 3/8 in. Stubby Impact Wrench (2554-20)
  • Hex adapter
  • Belt clip
  • Operator's manual

Milwaukee 2554-20 Compare with Similar Item

a table comparing the Milwaukee 2554-20 with two similar items:

FeatureMilwaukee 2554-20DeWalt DCF899BMakita XDT14Z
BrandMilwaukeeDeWaltMakita
Battery typeM12 Fuel20V MAX XRXDT14Z
Torque100 ft-lbs150 ft-lbs105 ft-lbs
Weight2.46 pounds3.1 pounds2.7 pounds
Price$199$239$229

As you can see, the Milwaukee 2554-20 is the lightest of the three, but it also has the lowest torque. The DeWalt DCF899B has the highest torque, but it is also the heaviest. The Makita XDT14Z is a good middle ground between the two, with a decent torque and a relatively light weight.

In terms of price, the Milwaukee 2554-20 is the most affordable option. The DeWalt DCF899B is the most expensive, but it does offer the highest torque. The Makita XDT14Z is priced in between the two.

Ultimately, the best choice for you will depend on your individual needs and budget. If you are looking for the lightest impact wrench with a decent torque, the Milwaukee 2554-20 is a good option. If you need the highest torque, the DeWalt DCF899B is a better choice. And if you are looking for a good middle ground between torque and weight, the Makita XDT14Z is a good option.

Here are some additional details about each of the three impact wrenches:

  • Milwaukee 2554-20 is a lightweight and compact impact wrench that is perfect for tight spaces. It has a max torque of 100 ft-lbs and is powered by a M12 Fuel battery.
  • DeWalt DCF899B is a powerful impact wrench that is perfect for heavy-duty tasks. It has a max torque of 150 ft-lbs and is powered by a 20V MAX XR battery.
  • Makita XDT14Z is a versatile impact wrench that is perfect for a variety of tasks. It has a max torque of 105 ft-lbs and is powered by an XDT14Z battery.

Milwaukee 2554-20 Pros/Cons and My Thought

the pros and cons of the Milwaukee 2554-20, along with some user reviews and my thoughts:

Pros:

  • Powerful motor: The 2554-20 has a powerful motor that can generate up to 1,200 ft-lbs of torque, making it a great choice for a variety of tasks, including lug nut removal, brake rotor installation, and suspension work.
  • Durable construction: The 2554-20 is built with a durable magnesium housing and impact rated internals, making it a long-lasting tool that can withstand heavy use.
  • Variable speed control: The 2554-20 features variable speed control, so you can adjust the torque output to match the specific task at hand. This can help to prevent damage to fasteners and other materials.
  • Compact and lightweight design: The 2554-20 is compact and lightweight, making it easy to maneuver in tight spaces and carry with you on the jobsite.
  • Tool-free chuck: The 2554-20 features a tool-free chuck, so you can quickly and easily change sockets.

Cons:

  • Expensive: The 2554-20 is a relatively expensive impact wrench.
  • Not as powerful as some other impact wrenches: The 2554-20 is not as powerful as some other impact wrenches on the market, such as the Milwaukee 2767 or the DeWalt DCF899.
  • Battery life: The battery life of the 2554-20 is not as long as some other impact wrenches.

User reviews:

Here are some positive and negative user reviews of the Milwaukee 2554-20:

  • Positive review: "This impact wrench is amazing! It's so powerful and compact, it's perfect for working on my car. I've used it to change tires, remove lug nuts, and even tighten suspension bolts. It's definitely a must-have for any DIYer or mechanic."
  • Negative review: "I was disappointed with the power of this impact wrench. It's not as powerful as I expected, and it struggles to break loose some of the lug nuts on my car. I would recommend a different impact wrench if you need something with a lot of power."

My thoughts:

Overall, the Milwaukee 2554-20 is a great impact wrench for the price. It's powerful, durable, and compact, making it a versatile tool that can handle a variety of tasks. However, it's not as powerful as some other impact wrenches on the market, and the battery life could be longer. If you're looking for the most powerful impact wrench, you may want to consider a different option. But if you're looking for a compact, powerful, and durable impact wrench that won't break the bank, the Milwaukee 2554-20 is a great choice.

Here are some additional thoughts:

  • The 2554-20 is a good choice for DIYers and professional mechanics who need a powerful and compact impact wrench.
  • It's not the most powerful impact wrench on the market, but it's still plenty powerful for most tasks.
  • The battery life is not the longest, but it's still good enough for most jobs.
  • The price is reasonable, making it a good value for the money.

Overall, I think the Milwaukee 2554-20 is a great impact wrench. It's powerful, durable, compact, and reasonably priced. I would definitely recommend it to anyone looking for a new impact wrench.

Milwaukee 2554-20 Where To Buy

some places where you can buy the Milwaukee 2554-20 and spare parts:

  • Milwaukee Tool Direct: This is the official website of Milwaukee Tool, so you can be sure that you are getting genuine products. They also offer a variety of spare parts for the 2554-20. Image of Milwaukee Tool Direct website
  • Walmart: Walmart is a major retailer that often has competitive prices on tools. They also carry a wide variety of Milwaukee products, including the 2554-20. Image of Walmart website
  • Amazon: Amazon is another major retailer that often has good prices on tools. They also have a wide selection of Milwaukee products, including the 2554-20. Image of Amazon website
  • Best Buy: Best Buy is a major electronics retailer that also carries a variety of tools. They often have competitive prices on Milwaukee products, including the 2554-20. Image of Best Buy website
  • Lowe's: Lowe's is a major home improvement retailer that also carries a variety of tools. They often have competitive prices on Milwaukee products, including the 2554-20. Image of Lowe's website
  • eBay: eBay is an online auction site where you can often find used or refurbished Milwaukee tools at a discount. However, it is important to be sure that you are buying from a reputable seller. Image of eBay website

I hope this helps!

Milwaukee 2554-20 Problems and Solutions

some common issues and solutions for the Milwaukee 2554-20:

Common Issues

  • The tool may not be turning on.
    • Make sure that the tool is plugged in and turned on.
    • Check the batteries to make sure that they are inserted correctly and are not dead.
    • If the tool is still not turning on, contact Milwaukee customer support.
  • The tool may not be working properly.
    • Make sure that the tool is not overloaded.
    • Check the tool for any damage.
    • If the tool is still not working properly, contact Milwaukee customer support.
  • The tool may be overheating.
    • Allow the tool to cool down before using it again.
    • If the tool continues to overheat, contact Milwaukee customer support.

Solutions

  1. Make sure that the tool is plugged in and turned on.

    • Check the power cord to make sure that it is plugged into an outlet and that the outlet is working.
    • Press the power button to turn on the tool.

  2. Check the batteries to make sure that they are inserted correctly and are not dead.

    • Make sure that the batteries are inserted in the correct orientation.
    • If you have spare batteries, try using them to see if the tool turns on.

  3. Clean the tool's contacts.

    • Use a soft cloth to clean the contacts on the battery terminals and on the tool's power port.

  4. Contact Milwaukee customer support.

    • If you have tried all of the above and the tool is still not working, contact Milwaukee customer support for further assistance.

Here are some additional tips to help you extend the life of your Milwaukee 2554-20:

  • Store the tool in a cool, dry place.
  • Avoid dropping or banging the tool.
  • Clean the tool regularly with a soft cloth.
  • Replace the batteries when they are no longer holding a charge.
  • Have the tool serviced regularly by a qualified technician.

By following these tips, you can help ensure that your Milwaukee 2554-20 provides you with years of reliable service.

Milwaukee 2554-20 Manual

Milwaukee 2554-20 Operator's Manual

Safety Information

  • Read and understand all instructions before using this tool.
  • Keep this manual for future reference.
  • Wear safety glasses and hearing protection when operating this tool.
  • Use only the correct size accessories for this tool.
  • Do not use this tool in wet or damp conditions.
  • Keep the work area clean and well-lit.
  • Do not overreach when using this tool.
  • Store this tool out of the reach of children.

Before Use

  • Inspect the tool before each use.
  • Replace any damaged or missing parts.
  • Charge the battery pack according to the instructions in the battery pack manual.
  • Use only Milwaukee M12 batteries and chargers.

Troubleshooting

  • If the tool does not work, check the battery pack for a charge.
  • If the battery pack is charged, check the fuse.
  • If the fuse is good, contact Milwaukee Tool for service.

Maintenance

  • Keep the tool clean and dry.
  • Inspect the tool for wear and tear.
  • Replace any worn or damaged parts.
  • Do not attempt to repair the tool yourself.

Warranty

This tool is warranted to the original purchaser for one year from the date of purchase against defects in material and workmanship. If this tool fails within one year of purchase, Milwaukee Tool will repair or replace it free of charge.

Contact Information

Milwaukee Tool 13335 West Lisbon Road Brookfield, WI 53005 Phone: 1-800-729-3878 Website: www.milwaukeetool.com

Additional Information

  • This tool is designed for professional use only.
  • Do not use this tool for any other purpose than its intended use.
  • Use this tool only in accordance with the instructions in this manual.
  • Milwaukee Tool is not responsible for any injury or damage caused by misuse of this tool.

Comments

Post a Comment

Popular posts from this blog

Unveiling The Ryobi Rcs2340b: Exploring Specifications, Manuals, Pros And Cons, And Common Problems

Image
RYOBI RCS2340B Information the information about the RYOBI RCS2340B electric chainsaw: Introduction The Ryobi RCS2340B is a 2300W electric chainsaw that is perfect for cutting logs and branches, cutting firewood, and other light-duty tasks. It features a powerful motor that provides constant high torque, a 40cm bar and chain for greater flexibility, and an automatic oiler system for user convenience. The chainsaw is also equipped with a rapid mechanical chain brake system, a tool-less chain tensioning system, and an anti-vibration system for added safety and comfort.
Read more

Einhell Tp-cd 18 Li-i Bl: The Ultimate Guide – Full Specifications, Comparisons, Manuals, Troubleshooting, And Where To Buy

Image
Einhell TP-CD 18 Li-i BL Information the information about the Einhell TP-CD 18 Li-i BL: Introduction The Einhell TP-CD 18 Li-i BL is a powerful and versatile cordless impact drill/screwdriver that is perfect for a variety of home improvement and DIY tasks. It is powered by a brushless motor that provides more power and a longer runtime than conventional carbon brush motors. The impact drill has a 2-speed metal gearbox that provides plenty of torque for drilling through tough materials, and the hammer function makes it easy to break through concrete and masonry. The drill also features a quick-release chuck that makes it easy to change bits, and a LED work light that illuminates the work area.
Read more

Ferm Sgm1006: Everything You Need To Know – Specifications, Comparisons, Manuals, And Troubleshooting

Image
Ferm SGM1006 Information The Ferm SGM1006 is a gas soldering iron and blow torch that is perfect for a variety of tasks, including soldering, heat shrinking, hot cutting, and lighting barbecues. It is powered by lighter gas and can reach a temperature of up to 400°C for soldering, 500°C for heat shrinking, and 1500°C for hot cutting. The soldering iron has a piezo ignition system for easy starting, and the blow torch has a flame adjustment knob for precise control. The SGM1006 also includes two interchangeable tips: a diagonal tip for soldering and a chisel tip for heat shrinking and hot cutting. Introduction The Ferm SGM1006 is a versatile tool that can be used for a variety of tasks around the home and workshop. It is a great choice for soldering electronics, heat shrinking tubing, hot cutting plastic, and lighting barbecues. The SGM1006 is powered by lighter gas and is easy to use, making it a great option for DIYers and professionals alike.
Read more